Variables and Commands CDHD
264 VarCom Reference Manual
MSPEED
Definition Motor Maximum Speed
Type Variable (R/W)
Description Gets/sets the maximum allowed velocity of the motor.
When the value of MSPEED is changed, CONFIG is required.
Syntax Read: MSPEED
Write: MSPEED <value>
Firmware 1.0.6
Drive status Disabled
Range If MOTORTYPE 0 (Rotary): 0 to 239999.999
If MOTORTYPE 2 (Linear): 0 to 127999.999
Default value If MOTORTYPE 0 (Rotary): 4500
If MOTORTYPE 2 (Linear): 0
Unit If MOTORTYPE 0 (Rotary): rpm
If MOTORTYPE 2 (Linear): mm/s
Non-volatile Yes
See also MVANGLF
MVANGLH
VLIM
VMAX
To Next Page
Loading...
