CDHD Variables and Commands
VarCom Reference Manual 241
MOTORNAME
Definition Motor Name
Type Variable (R/W)
Description Gets/sets the name assigned to the motor.
The name may contain up to 15 alphanumeric characters.
A quotation mark (ā) always precedes the name.
Additional valid characters for use in the text string:
( ) / - . :
Syntax Read: MOTORNAME
Write: MOTORNAME <text>
Firmware 1.0.6
Drive status Enabled | Disabled
Range Not Applicable
Default value ā
Unit Not applicable
Non-volatile Yes
See also DRIVENAME
FACTORYRESTORE
MOTORTYPE
CANopen 203Fh, sub-index 0
To Next Page
Loading...
