Variables and Commands CDHD
122 VarCom Reference Manual
HALLSTYPE
Definition Hall Signals Type
Type Variable (R/W)
Description Gets/sets the source and method used for Hall sensors.
Syntax Read: HALLSTYPE
Write: HALLSTYPE <value>
Firmware 1.0.6
Drive status Enabled | Disabled
Range 0 = Single-ended connection through the main Feedback
connector
1 = Differential connection through the main Feedback
connector.
2 = Differential connection through the Machine I/F
connector.
Refer to pinout documentation in product user manual.
Default value 0
Unit Not Applicable
Non-volatile Yes
See also FEEDBACKTYPE
HALLS
HALLSINV
MOTORSETUP
MENCTYPE
CANopen 2058h, sub-index 0
To Next Page
Loading...
