Variables and Commands CDHD
396 VarCom Reference Manual
VBUS
Definition Bus Voltage (DC)
Type Variable (R/W)
Description Gets/sets the drive bus voltage, used for current controller
design. VBUS also affects the value of VMAX.
When the value of VBUS is changed, CONFIG is required.
Syntax Read: VBUS
Write: VBUS <value>
Firmware 1.0.6
Drive status Disabled
Range 10 to 850
Default value 320
Unit V
Non-volatile Yes
See also OVTHRESH
UVMODE
UVTHRESH
VBUSREADOUT
CANopen 20D1h, sub-index 0
To Next Page
Loading...
