CDHD Variables and Commands
VarCom Reference Manual 303
OUTPUTS
Definition Outputs Status
Type Variable (R)
Description Indicates the state of all digital outputs.
A header lines identifies each of the outputs.
Syntax OUTPUTS
Firmware 1.0.6
Drive status Enabled | Disabled
Range 0 = Output off
1 = Output on
X = Not configured (CDHD 200V)
Default value Not Applicable
Unit Not Applicable
Non-volatile No
Example
-->OUTPUTS
1 2 3 4 5 6 7
See also OUT
OUTINV
OUTMODE
To Next Page
Loading...
