Variables and Commands CDHD
178 VarCom Reference Manual
KCDQCOMP
Definition Current DQ Axis Compensation
Type Variable (R/W)
Description Gets/sets the current controller DQ axis compensation.
When the value of KCDQCOMP is changed, CONFIG is
required.
Syntax Read: KCDQCOMP
Write: KCDQCOMP <value>
Firmware 1.0.6
Drive status Disabled
Range 0 to 1
Default value 1
Unit Not Applicable
Non-volatile Yes
See also ID
IQ
KCIMEMD
KCIMEMQ
CANopen 2004h, sub-index 0
To Next Page
Loading...
