Variables and Commands CDHD
336 VarCom Reference Manual
PWMFRQ
Definition PWM Frequency
Type Variable (R)
Variable (W) - Not intended for user unless instructed
by Technical Support.
Description Indicates the frequency of the PWM signals.
When the value of PWMFRQ is changed, CONFIG is required.
Syntax PWMFRQ
Firmware 1.0.6
Drive status Enabled | Disabled
Range 16
Default value 16
Unit kHz
Non-volatile Yes
See also
CANopen 20B2h, sub-index 0
To Next Page
Loading...
