Servotronix CDHD - Motorsetupst

Variables and Commands CDHD
244 VarCom Reference Manual
MOTORSETUPST
Definition Motor Setup Status
Type Variable (R)
Description Reports the internal stages of the MOTORSETUP procedure
together with the message that includes the running state,
actions taken or failure cause.
Syntax MOTORSETUPST
Firmware 1.0.6
Drive status Disabled
Range Not Applicable; see Example below
Default value Not Applicable; see Example below
Unit Not Applicable; see Example below
Non-volatile No
Example
-->motorsetupst
Motor Setup Not Issued
Stage: 0/27
-->
Example
1->motorsetupst
Motor Setup Active
Stage: 20/36
1->motorsetupst
Motor Setup Active
Stage: 23/36
1->motorsetupst
Motor Setup Active
Stage: 24/36
1->motorsetupst
Motor Setup Succeeded
Current Pulse: 125 mA 195 ms
Stage: 0/36
1->
See also INDEXFINDST
MOTORSETUP
PHASEFINDST