CDHD Variables and Commands
VarCom Reference Manual 251
MOVEINCDIST2
Definition Move Incremental Distance 2
Type Variable (R/W)
Description Gets/sets the second incremental move distance for the
motion buffer cycle.
Syntax Read: MOVEINCDIST2
Write: MOVEINCDIST2 <value>
Firmware 1.0.6
Drive status Enabled | Disabled
Range ±(2
31
1) [rev]
Default value 0
Unit If MOTORTYPE 0 (Rotary):
UNITSROTPOS 0 = rev
UNITSROTPOS 1 = count
UNITSROTPOS 2 = deg
UNITSROTPOS 3 = user-defined multiples of
revolutions (PNUM÷PDEN)
If MOTORTYPE 2 (Linear):
UNITSLINPOS 0 = pitch
UNITSLINPOS 1 = count
UNITSLINPOS 3 = mm
UNITSLINPOS 4 = user-defined multiples of pitch
(PNUM÷PDEN)
Non-volatile Yes
See also MB
MBST
MOVEINCCOUNTER
MOVEINCSPEED2
To Next Page
Loading...
