Variables and Commands CDHD
344 VarCom Reference Manual
RECRDY
Definition Ready to Record
Type Variable (R)
Description Indicates the ready status of the RECORD function. This
variable can be polled after a RECORD command is issued to
determine if the system is waiting for RECTRIG.
Syntax RECRDY
Firmware 1.0.6
Drive status Enabled | Disabled
Range 0 = RECTRIG has been received and record function is
armed.
1 = Record function is waiting to be armed by RECTRIG
command.
Default value Not Applicable
Unit Not Applicable
Non-volatile No
See also RECDONE
RECING
RECOFF
RECORD
RECTRIG
To Next Page
Loading...
