Variables and Commands CDHD
148 VarCom Reference Manual
IFOLD
Definition Drive Foldback Current Limit
Type Variable (R)
Description Indicates the current limit derived from the foldback
mechanism. A foldback condition occurs when IFOLD drops
below ILIM.
This variable is useful for checking how close the current is
to the foldback limit.
Syntax IFOLD
Firmware 1.0.6
Drive status Enabled | Disabled
Range 0 to 300
Default value Not applicable
Unit A
Non-volatile No
See also DICONT
FOLD
IFOLDFTHRESH
IFOLDWTHRESH
ILIM
CANopen 2069h, sub-index 0
To Next Page
Loading...
