Servotronix CDHD - Nltune

Variables and Commands CDHD
290 VarCom Reference Manual
NLTUNE
Definition HD Autotune Command
Type Command
Description Not intended for user unless instructed by Technical
Support.
Starts the HD autotuning procedure.
Syntax Read: NLTUNE
Write: NLTUNE {0|1|3}
Firmware 1.0.6
Drive status Enabled | Disabled
Range
Default value 0
Unit Not Applicable
Non-volatile Not Applicable
See also KNLP
NLNOTCHBW
NLTUNEPARAM
NLTUNEST
NLTUNETIME
POSCONTROLMODE
CANopen 2093h, sub-index 0