CDHD Variables and Commands
VarCom Reference Manual 295
OUT
Definition Output Status
Type Variable (R); (R/W in OUTMODE 0)
Description Gets/sets the state of a digital output.
Syntax Read: OUT <output#>
Write: OUT <output#> <value>
Firmware 1.0.6
Drive status Disabled
Range output# = 1 to 7
value:
0 = Output off
1 = Output on
Default value 0
Unit Not Applicable
Non-volatile No
Exampled
-->out 1
0
-->out 1 1
-->out 1
1
See also OUTINV
OUTMODE
OUTPUTS
CANopen 60FEh, sub-index 1
To Next Page
Loading...
