Variables and Commands CDHD
212 VarCom Reference Manual
MEMBIT
Definition Memory Bit
Type Command.
Description Not intended for user unless instructed by Technical
Support.
Memory bit peek/poke command for direct RAM access.
Syntax Read: MEMBIT <addr> <bit#>
Write: MEMBIT <addr> <bit#> {1|0}
Firmware 1.0.6
Drive status Disabled
Range Not Applicable
Default value Not Applicable
Unit 1 bit
Non-volatile Not Applicable
See also MEMF
MEML
MEMQ
MEMW
To Next Page
Loading...
