CDHD Variables and Commands
VarCom Reference Manual 75
DUMP
Definition Dump Drive Parameter Values
Type Command
Description Returns the set of configuration parameters that defines the
complete functionality of the drive. The command can be
used to backup the configuration.
Note: Some factory parameters, not intended for users, may
appear in the list.
Do not attempt to manipulate parameters that are not
described in this manual, or are marked as not for users.
Syntax DUMP
Firmware 1.0.6
Drive status Enabled | Disabled
Range Not Applicable
Default value Not Applicable
Unit Not Applicable
Non-volatile Not Applicable
See also LOAD
SAVE
To Next Page
Loading...
