CDHD Variables and Commands
VarCom Reference Manual 379
THERMTIME
Definition Motor Over-Temperature Time
Type Variable (R/W)
Description Gets/sets the number of seconds the drive will wait after
motor over-temperature detection before it opens the fault
relay.
Syntax Read: THERMTIME
Write: THERMTIME <value>
Firmware 1.0.6
Drive status Enabled | Disabled
Range 0 to 300
Default value 30
Unit second
Non-volatile Yes
See also THERM
THERMODE
THERMREADOUT
THERMTYPE
CANopen 20C8h, sub-index 0
To Next Page
Loading...
