CDHD Variables and Commands
VarCom Reference Manual 29
ANIN1ISCALE
Definition Analog Input 1 Current Scaling
Type Variable (R/W)
Description Gets/sets the scaling value of the analog current command
from input 1.
Syntax Read: ANIN1ISCALE
Write: ANIN1ISCALE <value>
Firmware 1.0.6
Drive status Enabled | Disabled
Range ±0.001 to DIPEAK
Default value DIPEAK/100
Unit A/V
Non-volatile Yes
See also OPMODE
To Next Page
Loading...
