CDHD Variables and Commands
VarCom Reference Manual 229
MIFOLD
Definition Motor Foldback Current
Type Variable (R)
Description Indicates the current limit derived from the motor foldback
mechanism. A foldback condition occurs when MIFOLD goes
below ILIM.
This variable is useful for checking how close the current is
to the foldback limit.
Syntax MIFOLD
Firmware 1.0.6
Drive status Enabled | Disabled
Range 0 to 300
Default value Not Applicable
Unit A
Non-volatile No
See also ILIM
MFOLD
MIFOLDFTHRESH
MIFOLDWTHRESH
CANopen 2033h, sub-index 0
To Next Page
Loading...
