CDHD Variables and Commands
VarCom Reference Manual 317
PFBBACKUPMODE
Definition PFB Backup Mode
Type Variable (R/W)
Description Enables and disables the PFB backup process.
In the event of an emergency stop, the PFB backup process
saves PFB to non-volatile memory, and restores it at the
next power up.
Syntax Read: PFBBACKUPMODE
Write: PFBBACKUPMODE<value>
Firmware 1.3.2
Drive status Enabled | Disabled
Range 0 = PFB backup process disabled
1 = PFB backup process enabled
Default value 0
Unit Not Applicable
Non-volatile Yes
See also PFB
PFBBACKUP
CANopen 2089h, sub-index 0
To Next Page
Loading...
