Variables and Commands CDHD
228 VarCom Reference Manual
MICONT
Definition Motor Continuous Current
Type Variable (R/W)
Description Gets/sets the motor’s continuous rated current.
When the value of MICONT is changed, CONFIG is required.
Syntax Read: MICONT
Write: MICONT <value>
Firmware 1.0.6
Drive status Disabled
Range 0.1 to 150
Default value 0.000
Unit A (peak)
Non-volatile Yes
See also DICONT
ILIM
MFOLD
MIFOLD
MIPEAK
CANopen 6075h, sub-index 0
To Next Page
Loading...
