CDHD Variables and Commands
VarCom Reference Manual 349
RELAYMODE
Definition Relay Fault Mode
Type Variable (R/W)
Description Gets/sets a value that defines how the fault relay operates.
Syntax Read: RELAYMODE
Write: RELAYMODE <value>
Firmware 1.0.6
Drive status Enabled | Disabled
Range 0 = Relay opens upon fault.
1 = Relay opens upon disable.
Default value 0
Unit Not applicable
Non-volatile Yes
See also ACTIVE
CLEARFAULTS
FLT
RELAY
REMOTE
CANopen 20B9h, sub-index 0
To Next Page
Loading...
