CDHD Variables and Commands
VarCom Reference Manual 337
PWMSATRATIO
Definition PWM Saturation Ratio
Type Variable (R/W)
Description Gets/sets the duration of current saturation within a
commutation cycle. If the value of PWMSATRATIO is
exceeded, a PWM limit is activated.
When the value of PWMSATRATIO is changed, CONFIG is
required.
Syntax Read: PWMSATRATIO
Write: PWMSATRATIO <value>
Firmware 1.0.6
Drive status Disabled
Range 0.5 to 1.5
Default valu
e
1.5
Unit Not Applicable
Non-volatile Yes
See also PWMFRQ
VBUS
CANopen 20B4h, sub-index 0
To Next Page
Loading...
