Variables and Commands CDHD
204 VarCom Reference Manual
LIMSWITCHNEG
Definition Limit Switch Negative Status
Type Variable (R)
Description Indicate the status of the hardware limit switches as
configured by the digital inputs (INMODE 5 and 6), in the
negative direction.
Syntax LIMSWITCHNEG
Firmware 1.2.12
Drive status Enabled | Disabled
Range Not Applicable
Default value Not Applicable
Unit Not Applicable
Non-volatile No
See also HOMETYPE
INMODE
LIMSWITCHPOS
POSLIMMODE
CANopen 2078h, sub-index 0
To Next Page
Loading...
