CDHD Variables and Commands
VarCom Reference Manual 53
CLTUNE
Definition Current Loop Autotune
Type Command
Description Not intended for user unless instructed by Technical
Support.
Autotunes the current control loop parameters by executing
a series of tests. Modifies the variables KCP, KCI, KCFF,
KCBEMF to optimize the current control performance.
Syntax CLTUNE
Firmware 1.0.6
Drive status Disabled
Range Not Applicable
Default value Not Applicable
Unit Not Applicable
Non-volatile Not Applicable
See also CLTUNEST
KCFF
KCP
KCI
KCBEMF
To Next Page
Loading...
