Variables and Commands CDHD
332 VarCom Reference Manual
PRBMODE
Definition PRB Activation Mode
Type Variable (R/W)
Description Not intended for user unless instructed by Technical
Support.
Get/sets the activation mode of the PRB signal generator.
PRB can either be disabled (PRBMODE 0), continuously
activated (PRBMODE 2), or activated only when recording
has been triggered (PRBMODE 1).
Syntax Read: PRBMODE
Write: PRBMODE <value>
Firmware 1.0.6
Drive status Enabled | Disabled
Range 0 = PRB generator not activated
1 = PRB generator activated only during recording
2 = PRB generator activated continuously
Default value 0
Unit Not Applicable
Non-volatile No
See also PRBFRQ
PRBPARAM
RECORD
RECTRIG
CANopen 20AEh, sub-index 0
To Next Page
Loading...
