Servotronix CDHD - Troubleshooting; Drive Status 7-Segment Display; Faults and Warnings

CDHD Variables and Commands
VarCom Reference Manual 39
ANIN2OFFSET
Definition Analog Input 2 Offset
Type Variable (R/W)
Description Gets/sets the offset voltage for analog input 2.
The offset can also be set by a zeroing procedure, using the
command ANIN2ZERO.
Syntax Read: ANIN2OFFSET
Write: ANIN2OFFSET <value>
Firmware 1.0.6
Drive status Enabled | Disabled
Range ±10
Default value 0.000
Unit V
Non-volatile Yes
See also ANIN2
ANIN2ZERO