Variables and Commands CDHD
240 VarCom Reference Manual
MOTORCOMMTYPE
Definition Motor Commutation Type
Type Variable (R/W)
Description Gets/sets a variable that defines the type of motor
commutation
When the value of MOTOCOMMTYPE is changed, CONFIG is
required.
Syntax Read: MOTORCOMMTYPE
Write: MOTORCOMMTYPE <value>
Firmware 1.2.12
Drive status Disabled
Range 0 = Brushless motor
1 = Brush motor
Default value 0
Unit Not Applicable
Non-volatile Yes
See also
CANopen 203Eh, sub-index 0
To Next Page
Loading...
