CDHD Variables and Commands
VarCom Reference Manual 357
SINPARAM
Definition Sine/Cosine Calibration Parameters
Type Variable (R)
Description Returns the parameters that are used for calibration of the
resolver sine and cosine signals. The parameters are in
hexadecimal representation.
Syntax SINPARAM
Firmware 1.0.6
Drive status Enabled | Disabled
Range Not Applicable
Default value Not Applicable
Unit Not Applicable
Non-volatile No
See also SINPARAM
SININITST
FEEDBACKTYPE
CANopen 20C1h, sub-index 0
To Next Page
Loading...
