CDHD Variables and Commands
VarCom Reference Manual 381
THERMTYPE
Definition Motor Over-Temperature Type
Type Variable (R/W)
Description Gets/sets the value that indicates the type of motor
temperature sensor.
Syntax Read: THERMTYPE
Write: THERMTYPE <value>
Firmware 1.0.6
Drive status Enabled | Disabled
Range 0 = Positive temperature coefficient (PTC)
1 = Negative temperature coefficient (NTC)
Default value 0
Unit Not Applicable
Non-volatile Yes
See also THERM
THERMODE
THERMREADOUT
THERMTIME
CANopen 20CAh, sub-index 0
To Next Page
Loading...
