Variables and Commands CDHD
368 VarCom Reference Manual
STOP
Definition Stop Motion Command
Type Command
Description Stops motion in OPMODE 0 (J and STEP commands) and
OPMODE 2 (T command). Unlike the K command, the drive is
not disabled using the STOP command.
In OPMODE 1 or 3, STOP is ignored.
Syntax STOP
Firmware 1.0.6
Drive status Disabled
Range Not Applicable
Default value Not Applicable
Unit Not Applicable
Non-volatile Not Applicable
See also DEC
DECSTOP
J
STEP
To Next Page
Loading...
