Variables and Commands CDHD
206 VarCom Reference Manual
LIST
Definition List Commands
Type Variable (R)
Description Returns a list of valid variables and commands. Only the
variables names, and not their values, are transmitted.
Note: Some factory variables and commands, not intended
for users, may appear in the list.
Do not attempt to use commands and variables that are
not described in this manual, or are marked as not for
users.
Syntax LIST
Firmware 1.0.6
Drive status Enabled | Disabled
Range Not Applicable
Default value Not Applicable
Unit Not Applicable
Non-volatile No
See also INFO
RECLIST
RECTRIGLIST
To Next Page
Loading...
