Servotronix CDHD - Connect Machine I;Os (C3); Enabling;Disabling a Drive

CDHD Variables and Commands
VarCom Reference Manual 31
ANIN1OFFSET
Definition Analog Input 1 Offset
Type Variable (R/W)
Description Gets/sets the offset voltage for analog input 1.
The offset can also be set by a zeroing procedure, using the
command ANIN1ZERO.
Syntax Read: ANIN1OFFSET
Write: ANIN1OFFSET <value>
Firmware 1.0.6
Drive status Enabled | Disabled
Range ±10
Default value 0.000
Unit V
Non-volatile Yes
See also ANIN1
ANIN1ZERO