CDHD Variables and Commands
VarCom Reference Manual 255
MOVESMOOTHLPFHZ
Definition Point-to-Point Move Low Pass Filter
Type Variable (R/W)
Description Gets/sets the low pass filter for point-to-point move
Syntax Read: MOVESMOOTHLPFHZ
Write: MOVESMOOTHLPFHZ <value>
Firmware 1.2.12
Drive status Disabled
Range 10 to 5000
Default value 5000
Unit Hz
Non-volatile Yes
See also ACC
DEC
MOVEABS
MOVEINC
To Next Page
Loading...
