Variables and Commands CDHD
392 VarCom Reference Manual
UVRECOVER
Definition Under-Voltage Recovery Mode
Type Variable (R/W)
Description Gets/sets a value that defines how the drive will recover
from an under-voltage fault.
Syntax Read: UVRECOVER
Write: UVRECOVER <value>
Firmware 1.0.6
Drive status Enabled | Disabled
Range 0 = Recovers by toggling drive from disable to enable
condition after the under-voltage condition clears.
1 = Automatically recovers when the under-voltage condition
clears.
Default value 0
Unit Not applicable
Non-volatile Yes
See also UVMODE
UVTHRESH
UVTIME
VBUS
VBUSREADOUT
CANopen 20CEh, sub-index 0
To Next Page
Loading...
