Variables and Commands CDHD
76 VarCom Reference Manual
ECHO
Definition Serial Communication Character Echo
Type Variable (R/W)
Description Enables/disables the serial port character echo. If echo is
enabled, characters received via the serial port are echoed
back to the serial port and displayed on the computer
monitor.
ECHO 1 is required for proper operation of ServoStudio.
Syntax Read: ECHO
Write: ECHO <value>
Firmware 1.0.6
Drive status Enabled | Disabled
Range 0 = Serial port echo disabled
1 = Serial port echo enabled
Default value Not Applicable
Unit Not Applicable
Non-volatile Yes
See also ADDR
MSGPROMPT
To Next Page
Loading...
