CDHD Variables and Commands
VarCom Reference Manual 59
DEC
Definition Deceleration
Type Variable (R/W)
Description Gets/sets the deceleration value of the drive.
Syntax Read: DEC
Write: DEC <value>
Firmware 1.0.6
Drive status Enabled | Disabled
Range If MOTORTYPE 0 (Rotary):
UNITSROTACC 0 = 0.004 to 16666.666
UNITSROTACC 1 = 0.23 to 1000000
UNITSROTACC 2 = 1.38 to 6000000
UNITSROTACC 3 = 0.23 to 1000000
If MOTORTYPE 2 (Linear):
UNITSLINACC 1 = 0.12 to 533333.333
UNITSLINACC 2 = 0.23 to 1000000
Default value If MOTORTYPE 0 (Rotary):
UNITSROTACC 0 = 10.000
UNITSROTACC 1 = 600.000
UNITSROTACC 2 = 3600.000
UNITSROTACC 3 = 50.000
If MOTORTYPE 2 (Linear):
UNITSLINACC 1 = 320.000
UNITSLINACC 2 = 10.000
Unit If MOTORTYPE 0 (Rotary):
UNITSROTACC 0 = rps/s
UNITSROTACC 1 = rpm/s
UNITSROTACC 2 = deg/s
2
UNITSROTACC 3 = user/s
2
If MOTORTYPE 2 (Linear):
UNITSLINACC 1 = mm/s
2
UNITSLINACC 2 = user/s
2
Non-volatile Yes
See also ACC
ANIN1
DECSTOP
J
STEP
UNITSROTACC
CANopen 6084h, sub-index 0
To Next Page
Loading...
