Servotronix CDHD - Fault and Status Queries; Fault Codes and Names

Variables and Commands CDHD
40 VarCom Reference Manual
ANIN2ZERO
Definition Analog Input 2 Zero Command
Type Command
Description Causes the value of the analog input 2 signal to become 0 by
modifying the analog offset value (ANIN2OFFSET).
Syntax ANIN2ZERO
Firmware 1.0.6
Drive status Enabled | Disabled
Range Not applicable
Default value Not applicable
Unit Not applicable
Non-volatile Not applicable
See also ANIN2
ANIN2OFFSET