Variables and Commands CDHD
48 VarCom Reference Manual
BAUDRATE
Definition Serial Baud Rate
Type Command
Description Sets the communication bit rate during a work session. This
parameter is not saved in the non-volatile memory, and is
intended to enable more reliable communication in noisy
environments. Changing the bit rate requires reestablishing
communication with the PC software.
Syntax BAUDRATE
BAUDRATE <value>
Firmware 1.3.2
Drive status Enabled | Disabled
Range 9600 to 115200
Default value 115200
Unit bps
Non-volatile Not Applicable
See also
To Next Page
Loading...
