CDHD Variables and Commands
VarCom Reference Manual 49
BW
Definition Velocity Loop Bandwidth for Pole Placement
Type Variable (R/W)
Description Gets/sets the velocity control loop bandwidth for the pole
placement controller. (VELCONTROLMODE 2 or 4)
Syntax Read: BW
Write: BW <value>
Firmware 1.0.6
Drive status Enabled | Disabled
Range 10 to 600
Default value 30
Unit Hz
Non-volatile Yes
See also FILTMODE
LMJR
MJ
MKT
TF
VELCONTROLMODE
CANopen 2010h, sub-index 0
To Next Page
Loading...
