CDHD Variables and Commands
VarCom Reference Manual 339
RECDONE
Definition Recording Done
Type Variable (R)
Description Indicates whether the RECORD command is done and data is
available.
Syntax RECDONE
Firmware 1.0.6
Drive status Enabled | Disabled
Range 0 = Recording not finished
1 = Recording done; data available
Default value Not Applicable
Unit Not Applicable
Non-volatile No
See also GET
RECING
RECOFF
RECORD
RECRDY
RECTRIG
CANopen 20E6h, sub-index 0
To Next Page
Loading...
