CDHD Variables and Commands
VarCom Reference Manual 71
DRIVENAME
Definition Drive Name
Type Variable (R/W)
Description Gets/sets the name assigned to the drive unit.
The name may contain up to 15 alphanumeric characters.
A quotation mark (“) always precedes the name.
Additional valid characters for use in the text string:
( ) / - . :
Syntax Read: DRIVENAME
Write: DRIVENAME <value>
Firmware 1.0.6
Drive status Enabled | Disabled
Range Not Applicable
Default value Not Applicable
Unit Not Applicable
Non-volatile No
Example
-->drivename “robot-axis1
-->drive name
“ROBOT-AXIS1
See also INFO
MOTORNAME
CANopen 2015h, sub-index 0
To Next Page
Loading...
