Variables and Commands CDHD
232 VarCom Reference Manual
MIPEAK
Definition Motor Peak Current
Type Variable (R/W)
Description Gets/sets the motor’s peak rated current.
When the value of MIPEAK is changed, CONFIG is required.
Syntax Read: MIPEAK
Write: MIPEAK <value>
Firmware 1.0.6
Drive status Disabled
Range 0.1 to 150
Default value 0.000
Unit A (peak)
Non-volatile Yes
See also DIPEAK
ILIM
IMAX
MICONT
MIFOLD
CANopen 2036h, sub-index 0
To Next Page
Loading...
