CDHD Variables and Commands
VarCom Reference Manual 73
DRIVESCRIPTST
Definition Drive Script Status
Type Variable (R)
Description Indicates the script that is being executed.
If no script is defined for the digital input combination,
nothing will run.
Digital input definition:
INMODE 5=9 Script
INMODE 6=10 Script bit 0
INMODE 7=11 Script bit 1
INMODE 8=12 Script bit 2
INMODE 9=13 Script bit 3
INMODE 10=14 Script bit 4
Digital inputs 6-10 define which script to run.
Digital input 5 triggers script execution.
Syntax DRIVESCRIPTST
Firmware 1.2.12
Drive status Enabled | Disabled
Range Not Applicable
Default value Not Applicable
Unit Not Applicable
Non-volatile No
Example
-->drivescriptst
DriveScript [01][0] Start:J 100:DriveScript [01][0]
Stop:
See also DRIVESCRIPT
INMODE
To Next Page
Loading...
