Variables and Commands CDHD
376 VarCom Reference Manual
THERMCLEARLEVEL
Definition Motor Over-Temperature Clear Fault Level
Type Variable (R/W)
Description Indicates the motor over-temperature fault level clearing.
Syntax THERMCLEARLEVEL
THERMCLEARLEVEL <value>
Firmware 1.0.6
Drive status Enabled | Disabled
Range 0 to 1000000
Default value 100
Unit Ohm
Non-volatile Yes
See also THERMODE
THERMTRIPLEVEL
CANopen 20C5h, sub-index 0
To Next Page
Loading...
