Variables and Commands CDHD
256 VarCom Reference Manual
MOVESMOOTHMODE
Definition Point-to-Point Move Smoothing Mode
Type Variable (R/W)
Description Defines the method of smoothing for the PTP move.
Syntax Read: MOVESMOOTHMODE
Write: MOVESMOOTHMODE <value>
Firmware 1.3.2
Drive status Disabled
Range 0 = No smoothing of profile
1 = LPF smoothing of profile based on MOVESMOOTHLPFHZ
Default valu
e
1
Unit Not Applicable
Non-volatile Yes
See also MOVEABS
MOVEINC
To Next Page
Loading...
