CDHD Variables and Commands
VarCom Reference Manual 209
MB
Definition Motion Buffer Command
Type Command
Description Activates the motion buffer sequence, as defined by:
MOVEINCCOUNTER, MOVEINCDIST1, MOVEINCDIST2,
MOVEINCSPEED1 and MOVEINCSPEED2.
PEINPOS and PEINPOSTIME must also be defined.
A set of two incremental position moves are repeated a
number of times, as defined by the counter. The next move
is performed when the PEINPOS condition is met.
Syntax MB
Firmware 1.0.6
Drive status Enabled
Range Not Applicable
Default value Not Applicable
Unit Not Applicable
Non-volatile Not Applicable
See also MBST
MOVEINCCOUNTER
MOVEINCDELAY
MOVEINCDIST1
MOVEINCDIST2
MOVEINCSPEED1
MOVEINCSPEED2
To Next Page
Loading...
