Variables and Commands CDHD
236 VarCom Reference Manual
ML
Definition Motor Inductance
Type Variable (R/W)
Description Gets/sets the motor’s minimum line-to-line inductance. This
variable is used for current loop controller design and as an
input to the vector control algorithms.
When the value of ML is changed, CONFIG is required.
Syntax Read: ML
Write: ML <value>
Firmware 1.0.6
Drive status Disabled
Range 0.001 to 1000
Default value 0.000
Unit mH
Non-volatile Yes
See also KCP
VBUS
CANopen 203Ah, sub-index 0
To Next Page
Loading...
