Siemens SINAMICS G220 - Mount the Lower Shield Plates

5.5.2 Mount the lower shield plates
Requirement
To mount the lower shield plates, you will need these screwdrivers:
• T20 torx screwdriver and pozidrive or slotted screwdriver for frame sizes FSA … FSC
• T25 torx screwdriver from frame size FSD1
Procedure
Tightening torque: 2Nm 
Figure5-2 Mounting the lower shield plates, frame size FSA
Tightening torque: 2Nm 
Figure5-3 Mounting the lower shield plates, frame size FSB
Installation
5.5Shield plates for converter with IP20 degree of protection
SINAMICS G220 converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB 101