Siemens SINAMICS G220 - Option Modules; Maximum Number of Option Modules in the Converter

5.7 Option modules
5.7.1 Maximum number of option modules in the converter
Description
Figure5-15 Example: IP20 converter, frame size FSC, with option modules OM-SMT and OM-DQ
The option modules are inserted in the option slots of the converter one below the other.
The maximum number of option modules that can be mounted depends on the speci󹪝c
option module type and the frame size of the converter.
Table 5-3 Combination of option modules
Number of op‐
tion modules
Converter frame size
FSA FSA with expansion
adapter for option
modules
FSB … FSD FSE
1 option module OM-DQ Every option module is
permissible
Every option mod‐
ule is permissible
Every option mod‐
ule is permissible
2 option modules Not possible OM-IIoT and OM-DQ
OM-SMT and OM-DQ
Every option mod‐
ule combination is
permissible
Every option mod‐
ule combination is
permissible
3 option modules Not possible Not possible Not possible Permissible
Installation
5.7Option modules
SINAMICS G220 converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB 109