Siemens SINAMICS G220 - Unpacking the Converter, Delivered on Pallets

5.4 Unpacking the converter, delivered on pallets
Requirement
Tool required:
• A knife to open the packaging
• A Torx screwdriver
Procedure
Procedure to unpack the converter:
1. Place the packed converter on a stable surface with the underside down.
2. Open the packaging on the upper side.
3. Remove the hole drilling template, the separately packaged accessories and the packaging
material:



①
②
③
Hole drilling template
Accessories
Packaging material
Installation
5.4Unpacking the converter, delivered on pallets
SINAMICS G220 converter
98 Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB